Primeboots 43479 LOW ENGINEER Espanol - Brown!
Classic ladies and men biker ankle boots with completely sewn rubber sole and steel toe cap.
The upper area is equipped with soft pigskin leather and the foot area with split cowhide leather. The inner shaft seams were additionally overstitched with a strip of leather. The wearing comfort is considerably increased by the use of a comfort intermediate insert and the partially padded insole.
The welted Primeboots 43479 AC LOW ENGINEER Arizona Espanol has a robust, waxed and oiled cowhide leather upper (PULL UP). Due to the special treatment method and the high-quality leather quality, the boot is very well suited for motorcycling.
The buckles attached to the ankle area and shaft are easily adjustable but not removable.
The oil-resistant rubber outsole is completely sewn to the outer frame.
The round 43479 AC-rule of the brand Primeboots have a comfortable fit and normal clamping heights.
The biker boot 43479 AC LOW ENGINEER Arizona Espanol of the brand Primeboots has a shaft height of approx. 14 cm.
The rubberized full leather heel has a height of approx. 3 cm.
The circumference of the upper is approx. 37 cm, can be extended or reduced by approx. 1-2 cm depending on the shoe size.
The thickness of the rubber sole including the cushioning midsole is approx. 1.2 cm.
Important hints and tips:
Deviations from the boots shown:
Due to the handcrafted production method of the Primeboots products, differences in colour or design may occur compared to the illustrated boots!
Each pair of Primeboots biker boots is unique!
With the welted manufacturing method (Goodyear Welted) always a small running-in phase is to be considered!
Waxed and oiled leathers (PULL UP) also require special care products.